How far does SimpliSafe entry sensor work?

Summary of the Article – SimpliSafe Entry Sensor FAQs

Question 1: How close do SimpliSafe entry sensors need to be?

SimpliSafe entry sensors need to be lined up within two inches of each other to indicate that the door or window is closed. Moving them more than two inches apart triggers the system to recognize that the entry has been opened.

Question 2: How far can a SimpliSafe sensor be from the Base Station?

The range of SimpliSafe’s sensors is approximately 800ft over open air. In a home environment, factors such as physical obstructions and wireless interference may slightly reduce the range. However, the Base Station should be able to communicate with sensors about 400ft away without any issues.

Question 3: How do I extend the range of my SimpliSafe door sensor?

To boost the signal range of a SimpliSafe door/window sensor, follow these steps:
1. Open up the sensor case.
2. Drill a wire hole at the top of the case.
3. Solder an electrical wire to the internal antenna.
4. Trim the antenna to one meter.
5. Reattach the sensor to the door/window.
6. Check your keypad to ensure proper functionality.

Question 4: How many SimpliSafe entry sensors do I need?

We recommend placing SimpliSafe entry sensors on all doors and windows that could potentially be accessible to an intruder. If you live on an upper floor, this typically includes your front door and any fire escape exits.

Question 5: Where do you put SimpliSafe entry sensors?

When installing a SimpliSafe entry sensor, place the sensor component on the moving part of the door/window and the magnet component on the non-moving part. This ensures accurate detection when the door or window is opened.

Question 6: Can SimpliSafe entry sensors go outside?

Yes, SimpliSafe entry sensors can be used outdoors. They can even be mounted using zip ties. For outdoor use, consider using a weatherproof enclosure to protect the sensor from rain and snow.

Question 7: Does SimpliSafe have a range extender?

SimpliSafe offers a recommended Wi-Fi extender that is compatible with their camera devices. However, their camera devices can also work with most other Wi-Fi extenders available on the market.

Question 8: How many square feet does SimpliSafe cover?

SimpliSafe sensors have a range of 400 feet and can cover up to 20,000 square feet. This makes the system suitable for homes and businesses of various sizes.

Question 9: Should I put an entry sensor on every window?

No, it is not necessary to install an entry sensor on every window. Focus on ground-floor windows and any windows that could potentially be accessed by intruders. Additionally, consider putting sensors on windows you want to monitor for any attempts to leave the house.

Question 10: Where should you put entry sensors?

For optimal functionality, mount a door and window sensor on a flat surface with the magnet on the adjacent surface. The positioning of the sensor and magnet halves does not usually matter, as long as they are in close proximity to each other (within an inch or two).

Question 11: Do SimpliSafe entry sensors use Wi-Fi?

The SimpliSafe entry sensors do not rely on Wi-Fi for their operation. They communicate wirelessly with the Base Station using their own proprietary signal.